Traffic Lane Separator Bollard

• Ideal for creating an inclusive cycling zone that also allows space for cyclists to easily exit in case of an emergency
• Rubber base won’t get damaged if driven over by cars or bicycles
• Manufactured in a flexible and durable polymer, the post will be able to withstand damage from cars or bicycles
• Quick and easy to install on the road
• Extremely low maintenance bollard as it won’t rust and won't need repainting
• 360 degrees high-intensity reflective bands for effective use even during the night
• Available in two heights and lengths to cater to your needs

As cycling becomes a more popular method of transport in the UK, more must be done to provide adequate and safe cycle lanes on our roads. The Traffic Lane Separator Bollard does just that. You can easily create a cycle and traffic lane divide that is clear for all to see when using the road.

80% of accidents involving cyclists happen during daylight, the most common is when motorists enter the cycle lane. So when adding the cycle lane bollards, it stops any vehicles entering the cyclist lane and potentially harming the cyclists.

The post has been manufactured from a flexible and durable polymer that is designed to withstand impact from cars, bicycles or pedestrians. If the post is hit it will return to its upright position and there will be no damage to the bollard or the reflective panels.

This is the ideal cycle lane separator for busy roads as it will provide a safe area for cyclists, whilst also allowing cyclists enough space to exit the lane in emergency situations. The CLS DB edge is also suitable for night time use as the 360 degrees reflective panels will make them visible to vehicles and bicycles.

You have a choice of 800mm or 1030mm height and each section is 1 metre long. 

What's Included

1x base section

1x 800mm or 1030mm bollard

2 x 100mm bolts (as seen in the downloadable document)